Description:
This model applies to exquisite carving, such as jewelry processing, decorative gifts, three-dimensional relief and so on. Accept the standard HPGL (TM) graphics instruction and G code for CNC machining instructions can be connected with various types of software. Water-cooled spindle with 1500W spindle motor, noise, no pollution, long life. Micro-step breakdown of the independent driving method, greatly enhancing the transmission accuracy. Engraving machine control circuit some reasonable design, big power savings. Independent research and development engraving machine operating software, which can break added engraving, engraved added power. And the workpiece in the same in just a starting point, not many pairs of origin and the origin of up to six memory function.


Features

1, the overall steel structure, structural steel is good, running smoothly.
2, imported high-precision three-axis ball screw drive, sports and high accuracy.
3, 32-bit DSP multi-axis motion controller, operator accuracy of 0.01mm
4, the Japanese stepper motor with micro-step breakdown of drive.
5, imports VVVF inverter with high-power high-speed spindle.
6, the maximum operating speed of up to 9m / minute, carving speeds of up to 6m / min
7, Standard diameter chuck, you can use a variety of commercially available standard of carving tools and milling cutter.
8, accept the standard HPGL drawing instruction and G code for CNC machining instructions, to work with all kinds of sculptures, art relief, three-dimensional mold design and processing software connection. Available optional software: Casmate engraving software, CAXA engraving software, ArtCAM relief art software, Type3 engraving software, Wentai carving version and Pro-E, Master CAM, UG mold software and so on.

Model	JF3030	JF6090	JF8090	JF1212	JF1218	JF1225
Work Platform Size (mm)	330*330	700*1070	900*1270	1300*1725	1300*2325	1300*2925
X, Y, Z travel (mm)	300*300*60	600*900*80	800*900*90	1200*1200*100	1200*1800*100	1200*2400*100
Maximum speed (mm / min)	9000
Maximum engraving speed (mm / min)	6000
Mechanical precision (mm)	0.05
Repeat positioning accuracy	0.05
Maximum feeding height (mm)	140	100		130
Drive Mode	Micro-step breakdown of
Power consumption (excluding spindle)w)	150			300
Spindle / Chuck	1.5W/ф6、ф3.175			1.5KW/ф6、ф3.175 ，ф10		2.2KW/ф12.7、 ф 6、ф3.175
Spindle speed (rev / min)	600-24000
Interface	DSP off-line system, USB interface
Carving Instruction	3D sculpture instruction set (HP-GL, G-code)
Runtime	Temperature: +5 ℃ ~ +35 ℃, relative humidity 30% -75%
Voltage	AC220V ± 10% 50HZ
机Machine Weight (kg)	150	190	260	550	680	810
Dimension (mm)	730*848*1380	1205*951 *1200	1405*1151 *1200	1825*1550 *1250	2425*1550 *1250	3025*1550*1250